Continuous Railing for flat roofs uses the NextGen 3000™ 58 lb. clamping base which accommodates 1.66 OD or 1.9 OD posts and rails. Posts are inserted in the clamp at the top of the base and tightened using a socket wrench. These clamping bases make for a solid railing system with no play. The railing is completed by adding top and mid rails into the drop-in fittings. The top and mid rails are connected in series with a Type 14 coupling. Guardrail will arrive as 10' lengths of pipe to be connected via fittings provided. Some field cutting may be necessary during installation. Toe Boards / Kick Plates are also available. Railings are OSHA compliant with no roof penetrations.
The standard finish for rails and bases is galvanized with powder coating available in Custom Colors.
Note: Minimum 5 ft. returns are required at terminations to satisfy OSHA standards.
Contact Us for design assistance.
Features: OSHA compliant engineered design Lightweight, stackable bases with grab handles Bases designed with neoprene rubber feet High quality / Low cost Simple installation
Technical Specifications: Tested to exceed OSHA Standards 58 lbs. steel bases Continuous top rails, mid rails and fittings Custom colors available
Installation: Tie-off according to OSHA Standards Remove stones from roof at base location Place bases 18 in. from the roof edge Assemble railing posts with drop in fittings and cap Insert posts into base socket Install top and mid rails into drop fittings Connect railings with type 14 coupling Install 5 ft. returns at terminations Tighten all set screws and nuts
Flier
Installation Instructions
3-Part Specifications
CAD
Warranty
