Kee Dome® Skylight Railing

Description

Features:
OSHA-compliant, freestanding fall protection
Non-penetrating, recycled PVC bases
Corrosion & Standing Water Resistant Bases
Pre-cut pipe for fast assembly
 
Materials:
Tubing is 2” OD, galvanized and pre-cut
Fittings Kee Klamp® galvanized malleable iron castings
Fittings meet ASTM A47-77-32510
Bases are recycled PVC weighing 20 lbs.
 
Installation:
Tie-off according to OSHA standards
Remove stones from roof at base position
Place PVC bases against skylight curb
Insert posts into bases and install top and mid rails
Tighten set screws with hex key

Kee Dome Skylight Railing Specifications

FeatureDetail
OSHA & Safety Standards Complies with OSHA 29 CFR 1910.23, 29 CFR 1910.66 (a)(4), 29 CFR 1926.502(b); BS EN ISO 14122-3, BS EN 13374
Base Weight & Material 20–22 lbs. (8.3 kg) per base; made from recycled PVC with non-skid rubber padding
Railing 1.5 in. ID / 1.90 in. OD (Schedule 40 / 3.2 mm wall thickness) ASTM A153 galvanized steel pipe
Fittings Malleable cast iron Kee Klamp fittings (galvanized to BS EN ISO 1461 / ASTM A47)
Standard Skylight Size Fits up to 13 ft. x 13 ft. for standard models (custom sizes and Mini models available)
Roof Penetration None (100% Freestanding, non-penetrating counterweight system)
Finish Options Hot-dipped galvanized finish standard (Custom powder-coated colors available)

Frequently Asked Questions

Can the Kee Dome system be customized for larger skylights or roof hatches?

Yes. While the standard model is designed for domes between 5’ and 13’ in length or width, the modular Kee Klamp® fittings and standard tube lengths allow for simple customization to fit any size skylight. It can also be adapted to include left- or right-hand self-closing gates for safe access and egress at roof hatches.

What is the difference between Kee Guard Skylight Railing and the Kee Dome system?

Kee Dome is a dedicated, prefabricated square/rectangular kit specifically optimized with corner bases for rapid assembly around standard dome skylights. In contrast, Kee Guard Skylight Railing is a modular, non-penetrating perimeter guardrail system engineered to protect workers along continuous runs or the outer edges of a flat or low-slope roof.

Can I use Kee Dome Skylight Railing on a metal roof?

No, Kee Dome is recommended for use on flat membrane roofs only. However, we do have several custom railing solutions for metal roofs. Simply contact one of our experts to start solving your unique skylight fall-protection problem today.

What is the Kee Dome Mini Skylight Railing?

The Kee Dome Mini Skylight Railing is a low-profile (24-inch height) modular safety system designed to protect roof skylights while minimizing visual impact from street level. To maintain OSHA compliance at this lower height, it incorporates a heavy-duty wire mesh screen directly above the skylight as a physical barrier against falls.

What are the standard kit sizes for Kee Dome?

• KDH1 - 10’ x 5’ x 3’7” kit

• KDH3 - 6’6”x 5’ x 3’7” kit /w gate

• KDK2 - 6’6”x 6’6” x 3’7” kit

• KDK3 - 13’x 6’6” x 3’7” kit

• KDK12 - 4’x4’x2’ kit w/ mesh screen

• KDK18 - 6’x6’x2’ kit w/ mesh screen