Description: KeeHatch® Safety Railing by the Safety Rail Source for safe
egress and ingress through roof type access hatches and for protection of
roof opening while roof hatch is up.
Meets OSHA Standard CFR 29 1910.23 and CFR 29 1910.27.
Product Selection Criteria: Forward barrier end exit left for single leaf hatches larger than 4’ x 6’ with a ladder or stairway accessing hatch end.
Type of Installation: Permanent bolt on installation of right and left handed railings, guard railings, mid railings and chain or gate as per supplied instructions and hardware.
Mounting Brackets: Kee Klamp fittings #161-7 or #162-7.
Pipe: 1 ¼” ID A53 Grade B seamed steel or 5/8” OD A500 seamed tube
Chain or gate system: 3/16” proof coil ASTM specification, zinc plated with quick links and
2 ½” zinc plated hoops on each end or “S” hook & Kee Klamp fitting 178-7. Gate is self closing type.
Pipe caps: weather and light resistant vinyl 1/ ½” deep and to fit snugly over pipe ends,
or Kee Klamp 77-7 plugs.
Bolts and washers: Hex head bolts 3/8" x 2 ½ or 1 1/4" grade Z, zinc plated. Fender washers
for inside of hatch curb or counter flashing and standard flat washers outside.
Railing fittings: By Kee Industrial Products
Sealant for brackets: Brackets shall be sealed per roof manufacturers’ approved methods. Preferably, the brackets should be installed on the counter flashing where possible
Labels: Safety no hoisting warning with manufacturer identification & patent number.
Installation: KeeHatch Railing Systems must be installed according to Safety Rail Source installation instructions provided in each kit.
Warranty: 7 years manufacturer’s parts only warranty.
Manufactured by: The Safety Rail Source, Inc. Norristown, PA (877) 723-3766. Patent No. 6,167,659