Product Model #:  RHSR-FB
Product Description:  KeeHatch® Safety Railing by the Safety Rail Source for safe egress and ingress through roof type access hatches and for protection of roof opening while roof hatch is up.  Meets OSHA Standard CFR 29 1910.23 and CFR 29 1910.27.

Product Selection Criteria:  Forward barrier exit left for hatches up to 4’ x 6’ with a single leaf lid.  Also used where hatchway exit is close to the roof edge or opens up to an obstruction.

Type of Installation: Permanent bolt on installation of right and left handed railings, guard railings, mid railings and chain or gate as per supplied instructions and hardware.

Materials:            
    Mounting Brackets:  Kee Klamp fittings #161-7 or #162-7.
    Pipe: 1 ¼” ID A53 Grade B seamed steel or 5/8” OD A500 seamed tube
    Finish: Galvanized.
    Chain or gate system: 3/16” proof coil ASTM specification, zinc plated with quick links and
        2 ½” zinc plated   hoops on each end or “S” hook & Kee Klamp fitting 178-7. Gate is self closing type.
    Pipe caps:  weather and light resistant vinyl 1/ ½” deep and to fit snugly over pipe ends,
        or Kee Klamp 77-7 plugs.
    Bolts and washers: Hex head bolts 3/8" x 2 ½ or 1 1/4" grade Z, zinc plated.  Fender washers
        for inside of hatch curb or counter flashing and standard flat washers outside.
    Railing fittings: By Kee Industrial Products

Sealant for brackets:  Brackets shall be sealed per roof manufacturers’ approved methods. Preferably, the brackets should be installed on the counter flashing where possible

Labels:  Safety no hoisting warning with manufacturer identification & patent number.

Installation: KeeHatch Railing Systems must be installed according to Safety Rail Source installation instructions provided in each kit.

Warranty:  7 years manufacturer’s parts only warranty.

Manufactured by:  The Safety Rail Source, Inc. Norristown, PA (877) 723-3766.  Patent No. 6,167,659